HOW TO MAKE A FIXED PULLEY RIG

:lol: HELLO LADS,TOPE HERE ONCE AGAIN.I AM GOING TO EXPLAIN TO YOU ON HOW TO MAKE A FIXED PULLEY RIG. START WITH A 40INCH OF 80LB SUFFIX SUPREME LINE.AT ONE END TIE ON A GEMINI GENIE LINK.NOW ADD A BREAKAWAY IMPACT SHIELD,A 2mm BEAD AND RIG CRIMP.CLOSE THE CRIMP LEAVING ABOUT AN INCH OR SO OF LINE FOR THE IMPACT SHIELD TO SLIDE ON.CONTINUE BY SLIDINGON A RIG CRIMP,A 2mm BEAD,A SIZE 10 ROLLING SWIVEL,ANOTHER BEAD AND CRIMP,BUT LEAVE THESE LOOSE.NOW SLIDE ON A 5mm BEAD,A SIZE 4 SWIVEL BY ONE EYE ONLY,AND ANOTHER BEAD.TO THE FREE END OF LINE TIE ON ANOTHER SIZE 4 SWIVEL.TO THIS TIE A 34 INCH LENGTH OF 40-80LB MONO AS THE MAIN HOOK TRACE.SLIDE ON A CRIMP,BEAD AND SEQUIN TO ACT AS A BAIT STOP AND FINNISH WITH A MUSTAD VIKNG SIZE 4/0 OR VARIVAS BIG MOUTH 4/0.TO THE SIZE 10 SWIVEL ADD 12INCH,OF 20LB AMNESIA,ANOTHER CRIMP,BEAD AND SEQIN,THEN A SIZE 2 OR 1 MUSTAD MATCH OR KAMASAN ABERDEEN.PUT THE HOOK IN THE INPACT SHIELD,SLIDE THE SIZE 10 SWIVEL UP THE RIG BODY UNTIL THE HOOK TRACE COMES TIGHT,THEN CRIMP THE SWIVEL IN PLACE.BOTH HOOKS SIT IN THE INPACT SHIELD FOR CASTING.THIS RIG IS USED FOR FISHING MIXED ROUGH GROUND AND ALLOWS A BIG BAIT TO BE FISHED TO TARGET COD,CONGER,HUSS AND BASS.BUT WITH A SMALLER BAIT TO TAKE SPECIES LIKE ROCKLING,POUTING,WHITTING,POOR COD AND FLATTIES.

this is like the 1 i use but without the swivel

hi cooky love the drawings, a picture is worth a thousand words!!!!!

thank i read this went out and tryed it but cept getting tangled, the hook cept catching the line with the wieght on how can i avoid this

[Fishing Forum Admin]

Bid you remember the bait clip ?

[steve devon]

ye the clip and did you make the hook length shorter than the weight bit
it needs to be shorter really else it gets tangled

[greg]

hello
when u reel in does the weight lift of, clear of the sea bed or something?

[greg]

oops meant to say hook not weight ....duh

[steve devon]

ye if you got a fish on or a rock :lol:

[Ben]

this only works if the fish is biggger than the wieght :P
might be a prob for me
and i only use 2/3oz wieghts